Test Accessories


  • f0f267a1-8f0e-425d-981a-7ccf25ec3a62.jpg
    Feature :The breakout leads are available with 4 different sizes of connectors: 0.6 mm, 1.5 mm, 2.3 mm and 2.8 mm.They allow an oscilloscope to connect to variety of components in ...

  • 7898c4a3-bd99-40f8-860a-de44e1a9f8d8.jpg
    Feature :The HT201 has been designed to allow fuel injector and primary ignition waveforms to be measured using Hantek oscilloscope products. Please note this attenuator should not...

  • 868abf08-f1a6-41f7-b4c8-660ac7de1860.jpg
    Feature :• AC/DC frequency range : Up to 20 kHz• Effective Measurement Range : 20mA to 65A DC• It is a transducer which allows your multi-meter to measure current data and enable y...

  • 1fcf3c5b-cbbd-4a4f-be10-d5d89ec03e2b.jpg
    Feature :• AC/DC frequency range: Up to 20kHz• Effective Measurement Range: 20mA to 650A DC• It is a transducer which allows your multi-meter to measure current data...

  • cb6d1eab-665e-4a4e-9719-3af6118ce228.jpg
    Feature :• AC/DC frequency range: Up to 20kHz• Effective Measurement Range: 20mA to 1100A DC• It is a transducer which allows your multi-meter to measure current dat...

  • 94e61509-56dd-4466-818a-4e9ca47370de.jpg
    Feature :The HT307 Back Probe Pins have many uses, such as back probing, piercing, and pin-tip probing. The fine tip can slide past weather pack seals to probe connectors. They are...

  • 730558c1-4e7f-45ba-b019-b6fe120933e7.jpg
    Feature : Auto ignition probe is a kind of inductive capacitance sensor, it must match with an oscilloscope.Close to use, can be used to test a spark ignition secondary overlapping...

  • 81e21a75-5633-4d33-a5bd-b855422b5199.jpg
    Feature : The DC Power Adapter will charge your scope while you're repair or maintain the car - just plug your scope with this adapter and then into any standard car cigarette plug...

  • 4a8dfeca-65d6-4427-bdc4-d545813dba71.jpg
    Feature : The Auto Test Cable (HT30A) is a kind of special line for assisting automobile measurement instruments to test various types of signals.It's about 3 meter in length allow...

  • 83bc3790-86a8-4814-98f8-ca666c3a736c.jpg
    Feature : The BNC to 4 mm adapter connects two 4 mm "banana" plugs to a BNC socketConnector Type: AdapterConvert From Positions: 1Convert From Gender: ReceptacleConvert To Position...

  • 1b9dc03b-36af-432d-b557-c7cd7f66b055.jpg
    Feature :It's an necessary interconnection cable for general function and signal generator applications. It is perfect for use in R&D laboratories, production test stations, se...

  • f0083ba8-827a-43b9-b6f1-86ac5f1573a1.jpg
    Feature : This breakout lead is easy to take voltage readings from numerous sensors in vehicle engine compartment. Connect the breakout lead plugs into the existing wire loom, and ...

  • 122fd55b-b8d7-46e0-9c27-b563078bda38.jpg
    Feature : Coil-on-Plug extension cord with earth cord are the simple accessory that allow you to take accurate secondary ignition measurements on Coil-on-Plug ignition systems.Coil...

  • 585c7e20-253e-428c-9a0e-58c07c7a32a3.jpg
    Feature :• Attenuation ratio: 100x• Portable design according with ergonomics• Integral injection molding makes the usage more flexible and the oscilloscope able to adapt more test...

  • 678c9baf-59de-4707-91e1-518f1734f3e7.jpg
    Feature : The LAN Interface PCB uses a High Impedance Transceiver (HIT) for signal transceiving in order to utilize a bus topology on the LAN

  • 4af0a4fa-48d7-4236-b1d6-4bd104c7db3d.jpg
    Feature : The dolphin/gator clips are fully insulated with a 4 mm socket in the handle, offering an easy connection to the HT30A auot test cable. The toothed grip offers good conta...

  • c1cdb32b-4281-4b55-bb19-26196e88a245.jpg
    Feature : The double gripper is designed for hard to make test connections of varying sizes and shapesThe double hooks assure a solid contact with easy-to-use spring loaded designT...

  • 4374bfd4-c3b3-4703-aa8d-d2bd371655af.jpg
    Feature : The multimeter probes offer a quick and easy solution, where a permanent connection is not required. The 4 mm socket in the handle of the probe connects straight into the...

  • 756d5690-7e86-474f-96a0-bffa5cd398c7.jpg
    Feature :Meter probe with standard plug (4mm), suitable for universal. Cable length: about 92cm;CAT III 1000V;Maximum rated current 16A.One pair (red and black) isolated test cable...

  • 77c9a6d0-039d-48e2-a060-af6f1be68c3c.jpg
    Feature :The external multi-meter socket offer a quick and easy solution, where a permanent connection is not requiredSize: 11.4mmContents:1pc X red socket1pc X black socket

  • de4080cd-da9f-40a9-95ee-9ac6834c7c84.jpg
    Feature :• Attenuation ratio: 1× and 10× optional• Portable design according with ergonomics• Integral injection molding makes the usage more flexible and the oscilloscope able to ...